FOSSiBOT F2400 Portable Power Station | 2400W 2048Wh
-
Long-Lasting, High-Quality EVE® LFP (LiFePO₄) battery and 5-year hassle-free warranty.
- AC Recharge the portable power station from 0 to 100% in just 2 hours.
- 4 ways to charge (AC/Solar/Car Charging/AC+Solar).
- 2048Wh Capacity | 2400W AC Pure Sine Wave Inverter (4800W Surge).
- Power up to 16 devices at once with 2400W access 16 Ports.
- Smart HD LCD display.
- LED Soft Lighting & SOS Signal.
- Smart Control & Monitor with App (Bluetooth & WiFi).
- 8ms uninterruptible home backup UPS.
- Powered by EVE® LFP (LiFePO₄) battery with 4000+ Life Cycles to 80%.
- Note: If you purchase a power station and solar panel combination product, the solar panels and power station will be shipped separately.
Battery Cycles
For the first time, Fossibot specially designed rubber plug covers for the DC and USB output ports, offering dust-proof and daily life water-resistance for the machine.
On your journey or encounters emergencies, the F2400 portable power station serves as a source of light or SOS flash light.
• More stable power, no harm to electrical appliance
• When used with a corrected sine wave, the deviceis heavily damaged and prone to failure.
Specifications
Video
FAQ
A: It depends on the total voltage and watts of solar panels you choose. F2400 supports solar panels with maximum of 500W, 50V in voltage. So with 200W solar panels, 2 solar panels are recommended.
A: (Such as 100W and 200W solar panel charging the F2400)
1. It cannot. Please use the same parameters of solar panels to charge the power station. It must be same wattage and same voltage.
2. The 100W solar panel voltage is normally 12V, and the 200W solar panel voltage is normally 18V. Mixing the two would cause the high voltage to flow back to the low voltage, which will damage the circuit and cause damage to the solar panels and power station.
A: F2400 offers daily life water-resistance for DC and USB ports, we designed rubber plug for these ports for life water-splash proof or light rain. Please keep it away from liquids as it is not IP68 water-proof.
A: Not, F2400 is a single unit.
A: PV input requirements for F2400:
Work Voltage: 11.5-50V
Input Power: 500W Max.
Include MC4 connectors.
A: By 1100W AC charge: 2H
By 900W AC charge: 2H 40min
By 700W AC charge: 3H 20min
By 500W AC charge: 4H 30min
By 300W AC charge: 7H
A: By 500W solar panels, fully charged within 4 hours
A: 1100W AC charge+500W solar panels: 1.5 Hours
A: 17 hours @12V, 8.5hours @24V.
A: Charge: 0-40℃ (32-104℉);
Discharge: -15-40℃ (-4-104℉);
Storage: -15-40℃ (-4-104℉).
Technically, it can power electrical devices under such situations, but please avoid charging it.
A: Calculate the total wattage of your devices. F2400 should work if the load doesn't exceed its rated 2,400W. When the load power exceeds 2,400W, the machine will reduce the voltage to make the load work stably. When the voltage is lower than 78V or total power exceeds 4600W, the machine activates protection and stops working.
A: Working time = F2400's Watt-Hours * 0.85 / operating power of your device.
Example: Let's assume your device's power consumption is 60W (might be a mini cooler)
2048Wh*0.85/60w = Roughly 29 hours of working time
Please note the actual power consumption varies based on many factors.
Please note the actual power consumption varies based on many factors.
A: No. If the battery pack is faulty or even dead, please contact Fossibot Customer Service.
A: When you received the machine, please recharge it to 100% battery. Then each time you use the machine, long press the main power button on top right for 3 seconds to turn on the F2400. When you connect your appliances or devices to the machine, press the related on/off button. If you don't use it, press the on/off button to turn off the AC/DC/USB power, otherwise it will consume the battery.
A: To protect your machine as well as prolong the battery using time, F2400 AC output and DC output ports will be turned off automatically after 8 hours of unuse. USB ports will be turned off after 5 minutes of unuse. When all discharge ports are in turned-off state, the main power button will be turned off after 5 minutes of no operation.